Download Print this page

Alarm - Car Intrusion - jablotron CA-1802 athos User Manual

Smart gsm/gps car alarms
Hide thumbs Also See for CA-1802 athos:

Advertisement

3
Alarm – car intrusion
Alarm:
An alarm can be terminated:
• by pressing a remote control button
• by sending an SMS command to unset the alarm from a mobile phone
Unsetting the alarm will terminate the sending of SMS messages and calling. You will subsequently
receive an SMS confi rming proper alarm termination. When the car alarm is controlled with the RC-80
wireless keyfob, alarm termination will only switch off the siren, but the car will remain secured and locked.
It can only be unlocked with repeated pressing of the unset button.
Reduction of the number of alarms:
Remote switching of the siren:
4)
A siren alarm can be disabled by an installer
5)
If calling in the case of an alarm having been activated and you answer the call, you will hear the sound of a siren. If the car is equipped with
a handsfree set, being able to listen in to the sounds in the car interior will be subsequently triggered.
T2711 - Jablotron - Manuál Atho7 7
T2711 - Jablotron - Manuál Atho7 7
If the car is guarded by the car alarm and one of the sensors is triggered (open-
ing of door, bonnet, detector activation etc.), the siren sounds for 30 seconds
Alarm SMS messages are sent, or optionally, calls to the authorized phones
5)
(up to 4) are made
.
If an alarm is triggered repeatedly by the same sensor (e.g. a faulty bonnet
sensor) at a time when the alarm is set, then this sensor is bypassed after
3 triggered alarms. It will be re-enrolled when the alarm is set again.
The siren can also be triggered remotely from authorized phones using the
"SIREN" SMS command. This command will switch the siren on for 30
seconds. The siren can be triggered off with the "SIREN OFF" command.
4)
.
7
7
8.4.2009 13:27:12
8.4.2009 13:27:12

Advertisement

loading

This manual is also suitable for:

Ca-1803 athos