Advertisement
Quick Links
Below there are some simple instructions
for loading and cleaning your machine.
KORO FRESH-BREW
WARNING
P
/P
OWER ON
OWER OFF SWITCH
D
ISPLAY
S
ELECTIONS BUTTONS
D
OOR LOCK
M
ACHINE DOOR
L
IQUID WASTE TRAY
L
ID AND LOCK
W
ATER TANK
N
OZZLE FOR JUG
S
OLID WASTE TRAY
G
RILLE
D
RIP TRAY FULL INDICATORS
L
ID
I
NSTANT POWDER CONTAINER LID
I
NSTANT POWDER CONTAINER
F
RESH PRODUCT CONTAINER
M
IXING BOWL
S
POUT HOLDER
F
-
RESH
BREWER UNIT
Operations to do with the
machine turned ON.
ON
07-2007 U253U01
Advertisement
Related Manuals for Necta KORO FRESH-BREW
Summary of Contents for Necta KORO FRESH-BREW
- Page 1 KORO FRESH-BREW Below there are some simple instructions Operations to do with the WARNING for loading and cleaning your machine. machine turned ON. OWER ON OWER OFF SWITCH ISPLAY ELECTIONS BUTTONS OOR LOCK ACHINE DOOR IQUID WASTE TRAY ID AND LOCK...
- Page 2 KORO FRESH-BREW LEANING OADING Loading products: Filling up the water supply tank: • Open the dispenser door. • Extract the handle and lift it. • Lift the dispenser lid and open the lids of the containers to be • Remove the water tank by pulling on the special handle.
-
Page 3: Deep Cleaning
KORO FRESH-BREW EEP CLEANING Removing and sanitising the mixer: Removing and sanitising the mixer: • Detach tube (D) from mixer. • Separate all the mixer assembly components: product funnel (A), • Rotate the product dispensing nozzle (A) upwards. powder deposit drawer (B), mixing bowl (C). - Page 4 KORO FRESH-BREW EEP CLEANING Reassembling the dispensing spouts: Cleaning the containers: • Insert the dispensing spout holder (A) into guide (B) and press • Open the dispenser door and lift the lid. until it clicks. • Lightly push back and lift the containers.
- Page 5 KORO FRESH-BREW EMOVING THE BREWER UNIT • Press the two jaws of the brewer unit. • Release the two clips (A) from the upper lid. • Pull the brewing chamber to extract it. • Remove the upper lid. • Take hold of the brewing chamber firmly.
- Page 6 KORO FRESH-BREW EMOVING THE BREWER UNIT • Lift the filter cleaning brush to remove it. • Press the filter levers (A) and at the same time pull the filter hol- • Remove any coffee grounds residue from the brush. der until completely extracted.
- Page 7 KORO FRESH-BREW NSTALLING THE BREWER UNIT • Fit the upper valve back onto the brewing chamber. • Fit the conveyor onto the brewing chamber. • Take hold of the brewing chamber firmly. • Fit the upper lid onto the conveyor.
- Page 8 KORO FRESH-BREW NSTALLING THE BREWER UNIT • Push the pumping chamber until inserted completely. • Fit the powder exhaust drawer back into position. • Before reinstalling the filter, check the conditions of the filter and • Insert the filter holder drawer pressing until it clicks.
Need help?
Do you have a question about the KORO FRESH-BREW and is the answer not in the manual?
Questions and answers