Adjusting The Picture - Onkyo BD-SP809 Instruction Manual

9.15 Adjusting the Picture

You can adjust the picture quality and store the setting you have adjusted on "Memory1" to "Memory (Source Direct)".
1. During playback, press [MODE] to display the play menu.
2. Use [Î / ï] to select "Picture Control", then press [ENTER].
3. Use [Î / ï] to select a memory from "Memory1" to "Memory (Source Direct)" to store your setting, then press
[ENTER].
• When "Video Resolution" is set to "Source Direct", "Picture Control" will be set to "Memory (Source Direct)"
automatically.
Picture Control
4. Use [Î / ï] to select an item to be adjusted, then press [ENTER] and use [Î / ï] to adjust the setting.
Brightness
Contrast
Progressive Mode
Item
Contrast
Brightness
Sharpness *
Gamma Correction *
ICR Red
ICR Blue
ICR Green
Colour
Hue
Noise Reduction
MPEG NR
Edge Enhancer
Qdeo True Color
Progressive Mode
) It may take several seconds to reflect the adjusted setting.
*
D Note
• The setting remains even you turn the unit into the standby mode except unplug the AC cord.
• ICR is the abbreviation of Intelligent Color Remapping.
• Qdeo True Color Processing (QTC) dynamically expands 8-bit video to use the full dynamic range offered by 10 and
12 bit displays, eliminating contours while preserving detail.
• Qdeo True Color is adjustable and effective when this unit is connected with the display device which is compatible
with Deep Colour.
• Picture control setting is available only video output from HDMI OUT MAIN jack.
36
Memory1
Auto
Description
Adjusts the difference between the bright and dark parts
of the picture.
Adjusts the brightness of the picture.
Adjusts the sharpness of the picture.
Adjusts the dark positions of the picture.
Adjusts the red colour of the picture.
Adjusts the blue colour of the picture.
Adjusts the green colour of the picture.
Adjusts the colour density of the picture.
Adjusts the balance between the green and red.
Reduces noise in the luminance signal and chroma signal.
Reduces block noise and mosquito noise.
Emphasises the edge of the picture.
Adjusts the smoothness of the picture. It is available for
10 or 12 bit display.
Selects the setting of the progressive scan.
Adjustment range
-7 to +7
0 to +15
-2 to +2
-2 to +2
0 to +7
0 to +7
0 to +7
-7 to +7
-7 to +7
Off, 1to 3
Off, 1to 3
Off, Soft, Middle, Strong
Off, Low, Middle, High
Auto, Video
Default setting
0
0
0
0
0
0
0
0
0
Off
Off
Off
Off
Auto
EN