Appareil de foyer électrique insérable
Inserto para el hogar eléctrico
SAVE THESE INSTRUCTIONS
CONSERVER CES INSTRUCTIONS
GUARDE ESTAS INSTRUCCIONES
Please read this manual before installing and using
your firebox
If the information in this manual is not followed
exactly, an electrical shock or fire may result causing
property damage, personal injury or loss of life
MFB33WSC
MFB33WSCSS
Electric Fireplace Insert
Veuillez lire ce manuel avant l'installation et
l'utilisation de votre foyer
Si les renseignements de ce manuel ne sont pas
exactement suivis, un choc électrique ou un incendie
peut survenir, et causer des dommages, des blessures
ou la perte de vie
1 1
YEAR
AN
AÑO
Por favor lea las instrucciones de instalación y de
operación antes de usar este caja de fuego
Si no sigue exactamente la información en este
manual, podría resultar en choques eléctricos o
incendio que pueden causar daños a la propiedad,
lesiones personales o la pérdida de la vida.
Use and care guide
Guide d'utilisation et d'entretien
Manual de uso y cuidado
REV07-04
Need help?
Do you have a question about the Gold MFB33WSC and is the answer not in the manual?
Questions and answers
my new remote will not turn on the fire place
The Muskoka Gold MFB33WSC remote may not turn on the fireplace if the main power button on the firebox is not pressed first. The flame effect (only) turns on when the main power button on the firebox is pressed. If the firebox is off, the remote will not function.
This answer is automatically generated
Is it possible to order a remote for the Gold MFB33WSC? The on off button on the remote has deterated and is not working.
@Ross E Barker
Can I buy a circuit board for Model# MFB33WSC
Why is it not heating up?
The Muskoka Gold MFB33WSC may not be heating up due to several possible reasons:
1. Power Supply Issue – Ensure the unit is plugged into a properly grounded 120V, 15A electrical circuit and that the power cord is securely connected.
2. Circuit Overload – If other appliances are on the same circuit, the breaker may have tripped. Reset the breaker and try again.
3. Safety Features Activated – The heater may have overheated and shut off. Allow it to cool and check for any obstructions around the unit.
4. Controls Not Set Correctly – Verify that the heater settings are correctly adjusted to produce heat.
5. Damaged Components – If none of the above resolve the issue, a component may be faulty, and the unit should be inspected by authorized service personnel.
Always follow the safety and troubleshooting instructions in the manual before attempting any repairs.
This answer is automatically generated