Resume Mode On/Off; Locking Stitch On/Off (After Color Change); Locking Stitch On/Off (After Thread Trimming) - Janome MB-4 Instruction Manual

Janome MB4 Embroidery Machine Instruction Manual
15
16
17
www.aaasewing.com
ON
OFF
OFF

[15] Resume mode ON/OFF

When resume mode is enabled, the last stitch of the
pattern sewn before turning the power off will be
resumed when the power is turned on again.
Press the right or left arrow button
[ON] or [OFF] the resume mode.
NOTE:
When you turn the power on, the confirmation window
will open.
Press the OK key to resume the last stitch of the
pattern sewn.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[16] Locking stitch ON/OFF (after color change)

The threads may ravel if the stitch data does not
contain locking stitches at the beginning of each color
section.
To avoid raveling, insert locking stitches at the
beginning by pressing the right arrow button
indicate [ON].
Press the left arrow button
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
[17] Locking stitch ON/OFF
(after thread trimming)
If you turn ON the jump thread trimming (refer to the
previous page), insert locking stitches after the jump
to avoid threads from raveling.
Press the right arrow button
Press the left arrow button
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
63
MB-4 Embroidery Machine
to turn
to go to the next
to
to disable this function.
to go to the next
to indicate [ON].
to disable this function.
to go to the next
MB4 Owners Manual/ User Guide