Janome MB-4 Instruction Manual page 88

Janome MB4 Embroidery Machine Instruction Manual
q
w
e
t
y
www.aaasewing.com
If you use the machine frequently, oil the following
points every four months.
z Turn the machine on and select pattern #1.
x Turn the hand wheel to set the hairline at 9 o'clock
r
c Apply a few drops of oil to the crank rod.
v Apply a few drops of oil to the Y-carriage bushings
t
NOTE:
Use only good quality sewing machine oil.
y
Apply oil only to the points indicated.
Do not apply too much oil, otherwise threads and
fabric may be stained with excess oil.
Wipe off any excess oil with a waste cloth.
85
Move the head to the right most position by
selecting needle bar #4.
The oiling points will be exposed.
Turn the machine off.
q Oiling points
so the crank rod is accessible.
w Hairline
Apply a few drops of oil to the main shaft through
the 2 holes.
e Crank rod
r Holes
through the slit of the base cover.
t Slit
y Y-carriage bushing
MB4 Owners Manual/ User Guide
MB-4 Embroidery Machine