Removing The Hoop - Janome MB-4 Instruction Manual

Janome MB4 Embroidery Machine Instruction Manual
z
q
x
c
www.aaasewing.com
w
e
r

Removing the Hoop

z Hold the setting plates with both hands and
lift the front side of the setting plates to
q
release them from the positioning pins.
Slide the hoop toward you and remove it from
the machine.
q Setting plate
w Positioning pin
x Loosen the hoop tightening screw.
e Hoop tightening screw
c Remove the inner hoop and the fabric.
r Inner hoop
NOTE:
Before you turn the machine off, make sure to
bring the needle bar to up position by pressing
the Auto thread cutter button.
29
MB-4 Embroidery Machine
MB4 Owners Manual/ User Guide