Quick Start; Memory Function - Silvercrest MICROWAVE KH 1167 Operating Instructions Manual

3) Start the cooking process
To start cooking, press button "Start/Quick Start" t.
In the LED indicator 2 the symbol for microwave
operation appears
Interrupting the process (Erase/Stop)
You can stop a process, interrupt it and then continue.
Interrupting the cooking process
Press the button "Erase/Stop/Child Safety" z once
to interrupt a cooking process. The appliance inter-
rupts the cooking process and stops the remaining
time. Press button "Start/Quick Start" t to resume
cooking.
Abort the cooking process
Press the button "Erase/Stop /Child Safety" z twice
to abort a cooking process. The appliance reverts to
standby mode.

Quick start

With this function you can begin cooking at 100 %
Power without delay.
• Set the desired time using the rotary switch 4.
• Press the button "Start/Quick Start" t. In the LED
indicator 2 the symbol for microwave operation
appears . The count down begins.
Or
• Press the button "Start/Quick Start" t. In the LED
indicator 2 the symbol for microwave operation
appears . The time is automatically set at
30 seconds and counts down backwards. Each
further pressing of the button "Start/Quick Start" t
raises the cooking time by 30 seconds.

Memory function

Use the memory function if you wish to carry out 3
processes, one after the other. If you choose several
operations and one of them includes thawing, thawing
must be set as the first in the sequence.
After finishing a process, the acoustic signal sounds
once, then the next process immediately starts.
. The count down begins.
Note:
The thawing programme should always be entered
in as the first one.
Note:
„Thawing by weight" and "Auto Menu" cannot be
programmed.
Example
You would like to prepare some food by using thaw
for 15 minutes + 10 minutes of 600 Watt microwave
power for cooking + 10 minutes grilling with top
and bottom heat.
1. Press the button "Thaw by time" w and programme
in the thawing time of 15 minutes with the rotary
switch 4. In the LED indicator 2 appear "M1",
"Auto Cook"
2. Press the button "Memory" o. "--:--" lights up in
the display. and "M2".
3. Press the button "Microwave" i four times to
programme in 600 Watt Power for cooking. In
the LED indicator 2 appear "P600" and the
symbol .
4. Turn the rotary switch 4 to set the cooking time
(duration: 10:00).
5. Press the button "Memory" o. In the LED indi-
cator 2 appear "- -:-" and "M3".
6. Press the button "Grill" u twice to programme
the top and bottom grill. In the LED indicator 2
appear the symbols
7. Turn the rotary switch 4 to set the grilling time
(duration: 10:00).
- 11 -
and the symbol .
and and "M3".