Table of Contents
Advertisement
Boot Menu
This menu is for setting the boot features and the boot sequence.
Table 20.
Boot Menu
Feature
Quiet Boot
Quick Boot
Scan User Flash
Area
After Power Failure
On Modem Ring
On LAN
On PME
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Notes:
1.
HDD = Hard Disk Drive
2.
ARMD-FDD = ATAPI removable device - floppy disk drive
3.
ARMD-HDD = ATAPI removable device - hard disk drive
Options
Description
•
Disabled
Disabled displays normal POST messages.
•
Enabled displays OEM logo instead of POST messages.
Enabled (default)
•
Disabled
Enables the computer to boot without running certain
•
POST tests.
Enabled (default)
•
Disabled (default)
Enables the BIOS to scan the flash memory for user
•
binary files that are executed at boot time.
Enabled
•
Stays Off
Specifies the mode of operation if an AC/Power loss
•
occurs.
Last State (default)
Power On restores power to the computer.
•
Power On
Stay Off keeps the power off until the power button is
pressed.
Last State restores the previous power state before
power loss occurred.
•
Stay Off (default)
Specifies how the computer responds to an incoming call
•
on an installed modem when the power is off.
Power On
•
Stay Off
Specifies how the computer responds to a LAN wakeup
•
event when the power is off.
Power On (default)
•
Stay Off (default)
Specifies how the computer responds to a PME wakeup
event when the power is off.
•
Power On
•
Disabled
Specifies the boot sequence from the available devices.
To specify boot sequence:
•
st
1
IDE-HDD
(Note 1)
1.
•
2.
nd
2
IDE-HDD
•
rd
3
IDE-HDD
The operating system assigns a drive letter to each boot
•
th
4
IDE-HDD
device in the order listed. Changing the order of the
•
Floppy
devices changes the drive lettering.
•
Not all of the devices in this list are available as second,
ARMD-FDD
(Note 2)
third, and fourth boot devices. The default settings for the
first through fourth boot devices are, respectively:
•
ARMD-HDD
•
(Note 3)
•
•
ATAPI CDROM
•
•
SCSI
•
•
Network
•
I2O
Select the boot device with <↑> or <↓>.
Press <Enter> to set the selection as the intended
boot device.
Floppy
st
1
IDE-HDD
ATAPI CDROM
Disabled
BIOS Setup Program
43
Advertisement
Table of Contents
