Table of Contents
Advertisement
BI440ZX Motherboard Product Guide
5. Replace the computer cover, connect the power cord, turn on the computer, and allow it to
boot. The recovery process will take a few minutes.
6. Listen to the speaker.
•
Two beeps and the end of activity in drive A indicate successful BIOS recovery.
•
A series of continuous beeps indicates failed BIOS recovery.
7. If recovery fails, return to step 1 and repeat the recovery process.
8. If recovery is successful, turn off the computer and disconnect its power cord.
9. Remove the computer cover and continue with the following steps.
10. On the jumper block (J7H1), move the jumper back to pins 1-2 as shown below to set normal
mode for Setup.
1
J7H1
3
11. Leave the upgrade diskette in drive A, replace the computer cover, and connect the computer's
power cord.
12. Turn on the computer and continue with the BIOS upgrade (see page 29).
How to Change the BIOS Language
You can use the BIOS upgrade utility to change the language the BIOS uses for messages and the
BIOS Setup program. Use a bootable diskette containing the Intel Flash Memory Update Utility
and language files (see "Performing the BIOS Upgrade" on page 29).
1. Boot the computer with the bootable diskette in drive A. The BIOS upgrade utility screen
appears.
2. Select
Update Flash Memory From a File
3. Select
Update Language Set
4. Select drive A and use the arrow keys to select the correct
5. When the utility asks for confirmation that you want to flash the new language into memory,
select
Continue with Programming
6. When the utility displays the message
.
<Enter>
7. The computer will reboot and the changes will take effect.
30
.
. Press
.
<Enter>
. Press
.
<Enter>
upgrade is complete
file. Press
.lng
<Enter>
, remove the diskette. Press
.
Advertisement
Table of Contents
