1. Manuals
  2. Brands
  3. PARKZONE Manuals
  4. Toy
  5. T-28D Trojan BNF
  6. Instruction manual

PARKZONE T-28D Trojan BNF Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ParkZone
products are distributed exclusively by
®
Horizon Hobby, Inc.
4105 Fieldstone Road
Champaign, IL 61822
© 2009 Horizon Hobby, Inc.
Horizon Hobby UK
Units 1-4 Ployters Rd
United Kingdom
Horizon Hobby Deutschland GmbH
Hamburger Strasse 10
25335 Elmshorn
DSM and DSM2 are trademarks or registered trademarks of Horizon Hobby, Inc. The Spektrum trademark is used with permission of Bachmann Industries, Inc.
Spektrum radios and accessories are exclusively available from Horizon Hobby, Inc.
www.parkzone.com
Printed 6/09 14589
USA
Staple Tye
Harlow, Essex
CM18 7NS
Germany
T-28D Trojan BNF

Instruction Manual

Charge-and-Fly
Park Flyer
™
Wingspan: 44.0 (1120mm)
Length: 36.0 (915mm)
Weight: 31.0 oz (880 g)
Battery : 3-cell 1800mAh Li-Po Battery (PKZ1031)
Motor: PKZ 480 960Kv outrunner brushless motor
ESC: E-flite 30A Switch-Mode BEC
Receiver: Spektrum AR500 Sport full range 2.4GHz DSM2

Advertisement

Table of Contents
loading

Related Manuals for PARKZONE T-28D Trojan BNF

Summary of Contents for PARKZONE T-28D Trojan BNF

  • Page 1: Instruction Manual

    T-28D Trojan BNF Instruction Manual ParkZone products are distributed exclusively by ® Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, IL 61822 © 2009 Horizon Hobby, Inc. Horizon Hobby UK Units 1-4 Ployters Rd Staple Tye Harlow, Essex CM18 7NS United Kingdom...

  • Page 2: Specifications

    The charge lead of a 3-cell Li-Po battery will plug Note: A 4-channel or greater radio is required for the air quickly. Your T-28D Trojan BNF already has the 3-wire charging, make certain the battery is on a heat-resistant into the larger 4-pin port on the bottom right of the T-28D Trojan.

  • Page 3: Transmitter-Specific Binding Instructions

    DX7 (includes DX7se): 12X: Step 2 A. To bind your T-28D Trojan to the DX7, plug the bind A. To bind your T-28D Trojan to the 12X, plug the bind plug into the Batt/Bind port on the AR500 receiver. plug into the Batt/Bind port on the AR500 receiver. Transmitter and Receiver Binding Transmitter-Specific Binding Instructions Binding is the process of programming the receiver of...

  • Page 4: Attaching The Wing

    Step 3 Step 4 Attaching the Wing Installing the Landing Gear In order to attach the wing of your T-28D, please follow 1. Install the main landing gear by inserting it into the locator hole in the wing. Swivel the landing gear these simple instructions: toward the retaining clips and gently snap into place.

  • Page 5: Replacing The Propeller

    Step 5 Step 6 Attaching the Horizontal Stabilizer Replacing the Propeller 1. Locate the horizontal stab of the tail. 1. Loosen prop hub by inserting a hex driver through the prop hub. Remove the prop hub and propeller. 2. Slide tail in allotted space of fuse, making sure the control horn installed into the horizontal tail will 2.

  • Page 6: Prior To Each Flying Session

    Always choose a wide-open space for flying your ParkZone T-28D Trojan BNF. It is ideal for you to fly at an AMA sanctioned flying field. If you are not flying at 6. With the rudder stick pushed to the left, the...
  • Page 7 3. When you move the throttle stick upward, the motor 7. If you want to advance to the next menu, allow the Your T-28D Trojan BNF comes out of the box with the This controller is very simple to use, and for safety, will will run.
  • Page 8 IMPORTANT NOTE ABOUT 74% CUTOFF: This Programming Menu 3 – Timing Programming Menu 5 – Start-Up Rate c. To select 15 Degrees – You will hear 3 short option will activate the soft cutoff at 74% of startup beeps. Move the throttle stick to center (between The default setting is 15 degrees.

  • Page 9: Troubleshooting

    The controller will beep more quietly than normal if the Make sure that you keep your T-28D Trojan BNF flying. Replacement parts are available at your local hobby shop or from input voltage is below the cutoff voltage when the battery Horizon Hobby (www.horizonhobby.com).
  • Page 10 Warranty Period Warranty Inspection and Repairs United States If you as the Purchaser or user are not prepared to accept the liability associated with the use of Exclusive Warranty- Horizon Hobby, Inc., (Horizon) To receive warranty service, you must include your Electronics and engines requiring inspection or repair this Product, you are advised to return this Product warranties that the Products purchased (the “Product”)

  • Page 11: Compliance Information For The European Union

    Declaration of Conformity Compliance Information for the European Union (in accordance with ISO/IEC 17050-1) Instructions for Disposal of WEEE by Users in No. HH20090520 the European Union This product must not be disposed of with other Product(s): PKZ T-28D BL BNF waste.

Table of Contents