How To Remove The Drain Pan (Ers*Series) - Mitsubishi Electric EHSD-MEC.UK Service Manual

DISASSEMBLY PROCEDURE

14. How to remove the drain pan (ERS*series)

(1) Remove the front panel.
(2) Disconnect all the field piping.
(3) Remove the saddle band and the rubber tube by
removing the 2 screws. Then remove the 2 screws fixing
the strainer valve stay. (Photos 14-1)
• Reuse the removed saddle band, rubber tube and screws
fixing the saddle band and rubber tube.
(4) Remove the screw on the manometer cover, then
remove the manometer claw. (Photo 14-1)
(5) Remove 3 screws on the cover plate. (Photo 14-3)
(6) Remove the cover plate. (Photo 14-4)
(7) Remove 3 screws each on the side panel (L, R), and 2
screws on the underneath surface and base assy from
the hydrobox. (Photo 14-5)
(8) Remove 5 screws on the base assy. (Photo 14-6)
(9) Remove the drain pan from the base. (Photo 14-7)
(10) Remove the 2 screws fixing strainer valve holder, and
remove the strainer valve holder. (Photo 14-2)
• Reuse removed the strainer valve holder and the
strainer valve holder fixing screws.
Photo 14-3
Cover plate
Screws
Photo 14-5
Photo 14-7
Drain pan
OCH571
Drain pan
Screws
Screws
Base
PHOTOS
Photo 14-1
Strainer valve
Screws
Saddle
Screws
band
Rubber
tube
Photo 14-2
Photo 14-4
Cover plate
Photo 14-6
76
Strainer valve stay
Screw
Manometer
Claw
cover
Strainer Screws
valve holder
Base
Base assy
Screws