Safe Use Of Your Unit; Battery Safety - TDS Recon Getting Started Manual

Additional connectivity
Your unit supports several additional kinds of connections. If you
do not have embedded Bluetooth or WLAN, you can purchase CF
cards to add the functionality. The following types of additional
connectivity are also possible:
Modem: The unit supports dial-up connections to an Internet
Service Provider and sending and receiving e-mail with file
attachments. You will need to purchase an external modem or a CF
modem.
Web-enabled cell phones: The unit can connect to the Internet via
Bluetooth and Web-enabled cell phones that are compatible with
Windows Mobile devices. USB phone connections are not
supported. Refer to your phone service provider for more
information on establishing Internet connections via your cell phone.
Installing additional software on your unit
The unit can run third-party software designed for Windows
Mobile. Most third-party software is installed by running a setup
program on the PC while the unit is connected with ActiveSync or
the Windows Mobile Device Center. Follow the setup instructions
that came with your software. If prompted, perform a reset to
complete the installation.

Safe Use of Your Unit

Battery safety

• Use only the battery supplied with your unit to power the unit. Use
of other power sources could damage the unit, void your warranty
and pose safety hazards.
• Caution: Do not expose to temperatures above +140 ° F (+60 ° C)
Do not short external contacts. Do not disassemble or mistreat the
battery. Failure to follow those instructions may present risk of
exposure to harmful chemicals, explosion, fire or high temperatures.
There are no user-serviceable parts in the battery pack.
• Handle a damaged or leaking battery with extreme care. If the
electrolyte comes in contact with your skin, wash the exposed area
with soap and water. If it comes in contact with the eye, flush the
eye with water for 15 minutes and seek medical attention.
16