Adjusting The Computer Stand - Lenovo ThinkCentre 0401 Hardware Maintenance Manual

Adjusting the computer stand

Your computer comes with a stand that you can use to position the computer. Pull
the stand open and adjust the position of the computer at an angle of 10° to 35° as
shown in the following illustration.
CAUTION:
Make sure the angle is at least 10° from the vertical; otherwise, the computer
might be unstable and fall over.
Your computer also supports UL (Underwriters Laboratories) certified 100 mm ×
100 mm (3.94 inches × 3.94 inches) wall mounts. For proper mounting, use four
screws of the following specifications:
Diameter × Pitch × Length: 4 mm × 0.7 mm × 10 mm (0.16 inch × 0.03 inch × 0.39
inch)
82
Hardware Maintenance Manual
35°
10°