Miele PT 7251 Operating Instructions Manual page 24

Frequently asked questions
If the display remains off, the dryer has no
power.
^ Check the plug, the main switch and the
fuses on-site.
Fan fault
§
Program stop. Press Start.
Motor temperature too high.
^ Allow the motor to cool down.
Drive motor fault
m
Motor temperature too high.
Continue: Press Start.
^ Allow the motor to cool down.
Power failure
y
Program stop.
Press Start.
^ Press h "Start" to continue the program.
Heating system fault
§
Program stop. Press Start.
Program run without heating.
^ Press h "Start" to continue the program
without heating.
Call Technical Service.
Heating system fault
§
Call Technical Service
if restart w/o success.
^ Call Technical Service.
24
Pressure sensor fault
§
Call Technical Service
if restart w/o success.
^ Call Technical Service, if restart is not
successful.
Gas system fault
§
Call Technical Service
if restart w/o success.
If the error occurs immediately after the
f
program start:
^ Open the gas valve and press h "Start".
If the error occurs in the middle of a program
run, the gas pressure may have decreased
due to use of additional gas appliances.
^ Press the h "Start" button.
f
^ Call the Technical Service, if restart is not
successful.
Card error
§
Reinsert card correctly in card reader.
Continue with End button.
f
^ Insert the card properly into the card
reader.
f
f
f
f
f