Using Service Jig; Self-Diagnosis Function; Self-Diagnosis Display - Sony Handycam HDR-FX1000 Service Manual

1-4. USING SERVICE JIG

Connect the CPC-13 jig (J-6082-443-A) to the CN1004 on the VC-543 board.
Pin No. Signal Name
1 (20) REG_GND
2 (19) RF_MON
3 (18) REG_GND
4 (17) SWP
5 (16) FRRV
6 (15) REG_GND
7 (14) GND
8 (13) GND
9 (12) EEP_SI_C
10 (11) EEP_SI_S
Note: The pin number in ( ) is test terminal number of
CN1004 on the VC-543 board.

1-5. SELF-DIAGNOSIS FUNCTION

1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
C : 3 1 : 1 1
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
HDR-FX1000/FX1000E_L2
Pin No. Signal Name
11 (10) EEP_SO_C
12 (9) EEP_SO_S
13 (8) EEP_SCK_C
14 (7) EEP_SCK_S
15 (6) D_2.8V
16 (5) MD2_C
17 (4) MD2
18 (3) XCS_MC_FLASH_C
19 (2) XCS_MC_FLASH
20 (1) XSYS_RST
Blinks at 3.2Hz
1 1
C 3 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
VC-543 BOARD (SIDE B)

1-5-2. Self-diagnosis Display

When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the "repaired by:", "block" in which the problem
occurred, and "detailed code" of the problem.
Detailed Code
Refer to "1-5-3. Self-diagnosis Code Table".
1-2
ENGLISH JAPANESE
ENGLISH JAPANESE
CPC-13
(J-6082-443-A)
1
20
10
11
20 1
CN1004