IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions before operating this apparatus. ������� 2. Keep these instructions for future reference. ���� �� �������� ����� �� ��� ���� 3. Heed all warnings to ensure safe operation. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 4.
RoadGear 160/260 Integrated Mobile Sound System page TABLE OF CONTENTS Introduction ........................4 Features..........................4 RoadGear Components ....................5 Disassembling The RoadGear..................6 Initial Setup ........................6 The RoadGear Mixer......................7 Making a Connection ........................7 Digital Effects Panel........................9 Master Controls ..........................9 The RoadGear Speakers .....................10 Microphones ........................10 Optional Accessories....................10 On The Road Application....................
Introduction We at Phonic would like to congratulate you on purchasing one of the RoadGear mobile audio systems, a set of audio equipment superior in design and versatility. The Phonic RoadGear sets allow you to take all the equipment you need to setup an advanced, all-in-one integrated sound system anywhere you go, with a minimum of fuss.
Two Speakers with specially molded enclosures ● One powered mixer built into a specially molded storage case ● Two Phonic UM 99 microphones, each with a 20 foot (6 meter) cable, clip and pouch. ● Two 30 foot (9 meter) speaker cables ●...
8. Turn the mixer power switch to the on position and set all input and output at appropriate levels to suit your needs. 9. When the RoadGear is in use, the storage compartment door must be kept open for better ventilation. page 6 RoadGear User's Manual PHONIC CORPORATION...
The RCA and TS jacks can both be used simultaneously; however, in some cases this is unadvisable as the blending of audio may have undesirable results. The audio fed into these inputs is fed to the corresponding stereo input mixing bus. page 7 PHONIC CORPORATION RoadGear User's Manual...
Page 8
15. Level Control This control alters the audio level of the audio feed to the main mix. This control should be set to the extreme left when the channel is not in use. page 8 RoadGear User's Manual PHONIC CORPORATION...
When set on left/right, both sets of power amplifier outputs can be used to output the left and right audio signals to up to four speakers. page 9 PHONIC CORPORATION RoadGear User's Manual...
Microphones Included with the RoadGear sets will be a dynamic microphone (two with the RoadGear 260), more specifically the Phonic UM 99 microphone. The Phonic UM 99 will no doubt supply you with a fantastically refined sound for use in public addresses or even for vocals in live performances.
On The Road Application The Phonic RoadGear sets are use the same was as an ordinary PA system would be, but with the convenience of having all the components in one handy package, and as such, has the potential to be set up in a variety different ways. Below is just one of the many possible examples we could have given you in setting up the gear, hopefully giving you a good idea of the amazing possibilities that RoadGear provides.
2 (wireless microphones and receiver Socket modules are optional) modules are optional) Included Accessories 1 x Phonic UM99 microphone with 2 x Phonic UM99 microphone with clip, 20’ cable, and carry pouch clip, 20’ cable, and carry pouch 2 x 30’ speaker cables 2 x 30’...
Please ensure, after unpacking the RoadGear set, that the docking locks on the speakers are locked back into place, to ensure the locks do not scratch the surface on which the speaker is standing. page 13 PHONIC CORPORATION RoadGear User's Manual...
48VDC connection and the leftmost is used for the negative 48VDC connection (the two middle sockets are for grounds). Warning: The power supply should not exceed 51V as to ensure the safe operation of the device. page 14 RoadGear User's Manual PHONIC CORPORATION...