To Switch A Cooking Zone Off Automatically - Miele KM 6113 Operating And Installation Instructions

Timer

To switch a cooking zone off automatically

36
You can set a time after which the cooking zone will switch off
automatically.
All cooking zones can be programmed for the same time.
If the time programmed is longer than the maximum
operational time allowed, the cooking zone will switch off
after the maximum time allowed (see relevant section).
^ Select a power setting for the zone you require.
^ Touch the m sensor.
00 appears in the timer display, and the minute minder
indicator lamp will flash.
^ Touch the m sensor.
The indicator lamp for the minute minder in the timer display
goes out, and an indicator light for the relevant cooking zone
will flash.
^ If several cooking zones are being used, touch the m
sensor repeatedly until the indicator lamp flashes next to
the cooking zone you wish to use this function for, e.g.
back right.
The indicator lamps for the cooking zones being used light
up clockwise, starting with the front left.
^ Touch the - or + sensor until the time you require appears
in the display, e.g. 15 minutes.
The time then counts down in minutes. The time remaining
can be seen in the display.
If you want to set another cooking zone to switch off
automatically, follow the same steps as described above.