Operation - Makita LC02 Instruction Manual

1
011530
5. Place the dust stopper and the dust pack together
into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way
into the slots in the cleaner cavity.
011529
6. Place the entire container part of the dust pack
inside the tool itself.
7. Close the front cover completely.
CAUTION:
Forgetting to install the dust bag or the dust pack,
•
failure to insert the dust stopper together with the
dust bag or the dust pack all the way into the slots
or using a broken or ripped bag, may allow dust to
get into the motor. This may result in motor failure.
Do not fold the cardboard at its opening when
•
installing the paper pack, .
Never throw away the dust stopper because it need
•
to be used repeatedly whenever either the dust bag
or the dust pack is used.
The paper pack for the cleaner is an important
•
component for maintaining the tool performance.
Using other than the genuine paper pack may
cause smokes or ignition.

OPERATION

CAUTION:
To connect attachments,
•
twist-insert attachment in direction of arrow to
ensure secure
disconnect attachment,
direction of arrow.
1. Cleaner cavity
such as
connection during use.
twist-extract
011520
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture, etc.
Nozzle slips on easily.
1
011521
Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
011522
Corner nozzle
Fit on the corner nozzle for cleaning corners and crevices
of a car or furniture.
nozzle,
To
also in
011523
7
1
2
3
1
2
1. Nozzle
1. Cleaner
2. Nozzle
3. Extension wand
1. Cleaner
2. Corner nozzle