Logiblocs Alarm Kit Inventors Manual page 2

ALARM KIT NOTES
INTRODUCTION
Welcome to the hi-tech world of Logiblocs !
These instructions will tell you all you need to know to make a Security Mat,
Water Bleeper, Drawer Guard, Metal Detector and a simple Lie Detector.
You may already have other Logibloc kits and, if so, you will be able
to combine the Logiblocs in this kit with the other kits to increase their
power and flexibility.
See us at www.logiblocs.com
SAFETY
Logiblocs are absolutely safe if used correctly. Please read the section
on safety at the end of this booklet. Do not use the Logiblocs until you
understand the safety advice. Please keep these instructions for
future reference.
Never ever touch or try to push any wires into a mains electrical socket or
plug. This would be very dangerous. Do not let the Logiblocs get wet and
never put any parts or wires into your mouth.
LOOKING AFTER YOUR LOGIBLOCS
It's a good idea to keep your Logiblocs in the box. There is plenty of
space underneath the plastic holder to store your models and any
Logibloc Extrablocs you may have.
Remember that Logiblocs are very special and need to be looked
after well. Keep them clean and try not to step on them !
2