Download Print this page
Logiblocs Alarm Kit Inventors Manual

Logiblocs Alarm Kit Inventors Manual

Advertisement

Quick Links

Alarm
Kit
We welcome your comments or questions
about our products or service
WRITE TO
Logiblocs Limited
PO Box 375 • St Albans • Herts
AL1 3GA • UK
E-MAIL
service@logiblocs.com
VISIT OUR WEBSITE
www.logiblocs.com
I N V E N T O R ' S
M A N U A L
Please retain this information for future reference
Logiblocs® is a registered trademark of Logiblocs Limited
© 2002 Logiblocs Limited
1001
VERSION #180602
All rights reserved.

Advertisement

loading

Summary of Contents for Logiblocs Alarm Kit

  • Page 1 I N V E N T O R ’ S M A N U A L Please retain this information for future reference Logiblocs® is a registered trademark of Logiblocs Limited © 2002 Logiblocs Limited 1001 VERSION #180602 All rights reserved.
  • Page 2 See us at www.logiblocs.com SAFETY Logiblocs are absolutely safe if used correctly. Please read the section on safety at the end of this booklet. Do not use the Logiblocs until you understand the safety advice. Please keep these instructions for future reference.
  • Page 3 Power: These energy suppliers give life to Logibloc inventions. This may hurt the connectors. All Logiblocs work with each other so with a few Extrablocs you can build on to your inventions to make them even more powerful using your Logimagination.
  • Page 4 CONTENTS WHAT THE LOGIBLOCS DO Please check that you have all the parts in the Alarm Kit as follows: BATTERY CONNECTOR (9V DC 6F22 or 6LR61) This brings the power from the battery to make the Logiblocs work. Plug it in to the CROSS or wherever there is a space...
  • Page 5: Let's Get Started

    LIE DETECTOR LET’S GET STARTED We can use the Alarm Kit to make a Lie Detector. This uses the effect that The first thing to do is to get to know the Logiblocs and make sure that they when people do not tell the truth they are working OK.
  • Page 6 BLEEP should now come on. setting the alarm off. STRAIGHT BLEEP Hide the Logiblocs at the back or beside the drawer where there is usually Step 6 a bit of space. Add the DELAY. This will light up and when you separate the Jack Plug...
  • Page 7: Door Alarm

    Connect the battery and to find other ways to let water plug in the Jack Plug. trigger the Logiblocs. Fix the sheets to the side of the bath to warn you when the water has reached the right level !
  • Page 8 Stick your “Alarmed” sticker on the door to tell people that you are alarmed ! Don’t forget to disconnect the battery when you are not using the Logiblocs Step 3 to make it last as long as possible ! If you find it easier, you only need to...