Table of Contents
Advertisement
Installation
When installing one or more new WLAN adapters to your
network, you can set it up in one of two ways:
• Use the DHCP service on your network to assign IP addresses
to each WLAN adapter. Installation using DHCP, p. 9.
• Set the device to a default IP address to access the configura-
tion interface and assign a fixed IP address. Installation using
the factory default IP address, p. 10.
Installation using DHCP
If your network has a DHCP server, follow the steps below to
install new WLAN adapters:
1
Make a note of the MAC address of every device that you
are about to install (The MAC address can be found on the
bottom plate of the device).
2
Configure your DHCP server to assign an IP address to each
device. Refer to the documentation of your DHCP server for
more information.
3
Deploy the devices throughout your organization.
No power
Connection OK
File transfer
Booting / IP search
No access rights
No connection
Error
MAC A1:B2:C3:1A:2B:3C
Default: DHCP,
user name: ---
password: administrator
4
Slide a Pocket Memo dictation recorder 9600 or 8000 series
into the docking slot of the docking station.
5
When using a Pocket Memo dictation recorder 9600
series, press and hold the RIGHT SMART button and
the MENU button on the recorder simultaneously for 3
seconds.
When using a Pocket Memo dictation recorder 8000 series,
press and hold the F3 and the + button on the recorder
simultaneously for 3 seconds.
X The current configuration settings of the WLAN adapter
are displayed on the recorder' s screen.
WLAN ADAPTER
IP ADDRESS:
192.168.XXX.XXX
MAC ADDRESS:
A1:B2:C3:1A:2B:3C
9
EN
Advertisement
Table of Contents
