Table of Contents
Advertisement
Upgrading the firmware
1
Download the latest firmware (.lds file) from
www.philips.com/dictation.
2
Save the .lds file to a network location that the WLAN
adapter can access. This can be an FTP server or an HTTP
Web server.
3
Click on the FIRMWARE UPGRADE button on the
symbol bar of the Administration Tool
4
Select the type of server (FTP, FTPS, HTTP) where the
.lds file is saved.
5
Enter the domain name or IP address of the server hosting
the firmware file into the SERVER field.
6
Enter the port number of your server into the PORT field.
Unless your server is configured to use non-standard port
numbers, you should use 21 for an FTP server and 80 for an
HTTP Web server.
7
If your server requires authentication to download the firm-
ware file, enter the name of the user account, the password,
and confirm the password. Otherwise leave the USER-
NAME, PASSWORD and CONFIRM PASSWORD
text fields empty.
8
Enter the full path (beginning with "/") and file name to the
.lds file of the new firmware into the PATH ON SERVER
text field.
9
Press the UPGRADE NOW button to start the upgrade
process.
X A firmware upgrade will be uploaded to all WLAN adapt-
ers that appear online in the main pane of the Adminis-
tration Tool, and may take a few minutes to complete.
X During the firmware upgrade process, a WLAN adapter
will temporarily go offline and will go back online when
the upgrade process is complete.
X After upgrading, reload the main pane (click the RE-
LOAD button) and check the current firmware version.
26
EN
Tip
• The current firmware version of a WLAN adapter can be
found in the FIRMWARE column of the Administration
Tool' s main pane.
Advertisement
Table of Contents
