Table of Contents
Advertisement
4 Configuration
Once the device is connected to the network, it can be config-
ured using a simple HTML interface from any HTML4-compliant
Web browser.
Access the configuration interface
1
Open a Web browser on your computer.
2
Enter the IP address of the WLAN adapter that you want
to configure into the address field of the Web browser. For
more information about setting up the IP address Installa-
tion, p. 9.
3
The Web browser prompts you for a user name and
password. Leave the user name field empty and enter the
administrator password. If you are accessing the configuration
interface for the first time, the default password is ‚adminis-
trator'.
X The configuration interface is displayed with the following
pages General, Network, Upload.
12
EN
Wireless and encryption settings
By default, wireless LAN is disabled. To configure it, follow the
procedure below.
1
Open the WLAN adapter configuration interface by entering
its IP address in your Web browser or using the WLAN
adapter Administration Tool.
2
Click the NETWORK page.
3
Check the WLAN check box on the Connection Settings
panel.
4
Enter the name of the wireless network into the SSID field
or click the REFRESH button and select a wireless network
from the list of available wireless networks.
5
Select the Security mode and enter the password for the
wireless network.
6
Click the SUBMIT button at the bottom of the IP settings
panel in order to save your changes.
X The WLAN adapter will reboot, activate wireless LAN and
disable the LAN connection.
Advertisement
Table of Contents
