Troubleshooting - Philips DVP1120 User Manual

Troubleshooting

WARNING
Under no circumstances should you try to repair this unit yourself, as this invalidate the
warranty. Do not open this unit as there is a risk of electric shock.
If a fault occurs, fi rst check the points listed below before taking this unit for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
No power.
No picture.
Completely distorted picture
or black/white picture.
36
1_dvp1120-2008_93_eng1_final813.36 36 1_dvp1120-2008_93_eng1_final813.36 36
Downloaded From Disc-Player.com Philips Manuals
Problem
– Press 2 on the unit to turn on the power.
– Ensure that the AC outlet have power.
– Disconnect the power cord from the power outlet
– Refer to your TV manual for correct Video In channel
– If this happens when you turn on the progressive scan
– If this happens after you set the colour system, wait
– Check the video connection.
– Ensure that the disc is compatible with this unit.
– Sometimes a small amount of picture distortion may
– The disc is dirty. Clean the disc.
Solution
for a few minutes. Reconnect the power cord and try
to operate again as usual.
selection. Change the TV channel until you see the
DVD screen.
feature, wait for 15 seconds for the auto recovery or
switch back to the default mode as below:
1) Press ç on this unit.
2) Press and hold numeric keypad '1' on the remote
control.
for 15 seconds for the auto recovery or switch back
to the default TV colour system:
1) Press ç on this unit.
2) Press and hold numeric keypad '3' on the remote
control.
appear. This is not a malfunction.
2008-03-24 2:43:18 PM 2008-03-24 2:43:18 PM