Philips DVP1120 User Manual page 37

No sound or distorted sound.
The remote control does not
function properly.
The unit does not start
playback.
The buttons on the unit do not
work.
1_dvp1120-2008_93_eng1_final813.37 37 1_dvp1120-2008_93_eng1_final813.37 37
Downloaded From Disc-Player.com Philips Manuals
Problem
– Check the audio connections to the connected audio
– Make sure that the connected audio device is turned
– Set the digital output setting correctly, based on the
– Aim the remote control directly at the sensor on the
– Remove any obstacles between this unit and the
– Batteries are weak, replace the batteries.
– Check the polarities of the batteries are as indicated
– Insert a readable disc with the playback side facing
– Make sure the disc is not scratched or warped. Check
– The disc is of a different region code.
– You may need to enter the password in order to
– Moisture may have condensed inside this unit.
– There is a technical problem. Disconnect this unit
Troubleshooting
Solution
device.
on to the correct input source.
device you connected to this unit. See "Audio Menu –
Digital Output" for details.
front of this unit (not towards the TV).
remote control.
on the remote control (± signs).
inwards. The DVD+R/CD-R must be fi nalised.
if the disc is defective by trying another disc.
unlock the disc for playback.
Remove the disc and leave this unit turned on for
about an hour.
from the power outlet for 10 seconds and reconnect
again.
(continued)
37
2008-03-24 2:43:18 PM 2008-03-24 2:43:18 PM