Creating New Folder Numbers L No.reset; Automatic Review Of A Series Of Pictures U Slide Show; Presenting All Pictures On The Memory Card - Leica DIGILUX 2 Instructions Manual

Creating new folder numbers - L NO.RESET
The LEICA DIGILUX 2 writes the picture numbers to
the memory card in ascending order. Initially, the
corresponding files are all stored in one folder. How-
ever, you can create a new folder at any time, which
you can use to store subsequent pictures, e. g. to
group them together more clearly.
Setting the function
1. In the record setup menu k SETUP
(see pp. 113/122) select L NO. RESET (3.20).
2. Press right on the direction pad (1.30) to open the
associated sub-menu and follow the further instruc-
tions, i. e. choose whether you want to increase the
original folder number by 1 and start picture num-
bering again (at 0001), or whether you want to
cancel your decision and keep the folder number.
Note: The folder numbers, e. g. 100-0001 comprise
two groups. The first groups of digits name the rele-
vant folder, the second the consecutive picture num-
ber within the folder.
This ensures that there are no duplicated file names
after the RESET function is used and the data is trans-
ferred to a computer.
170 / Detailed guide / Review mode
Automatic review of a series of
pictures - U SLIDE SHOW
With the LEICA DIGILUX 2 you can automatically play
back a sequence of pictures saved on the memory
card on the camera monitor or the screen of a
connected computer or a TV set like a slide show.
You can also select how long each picture is shown
for and whether any sound recordings are to be
played back at the same time. Using DPOF marking
3
/ (see p. 162) you can also limit the function to pictures
3
you have previously selected.
Notes:
• Automatic review is not available for video record-
ings (ü).
• The display time for pictures with sound is fixed,
i. e. you cannot change the length of time such pic-
tures are displayed.
• The DPOF markings for a slide show do not apply to
print orders (see p. 162).
• DPOF markings made with this camera overwrite
all existing markings, in particular those made with
other devices.
Setting the function
1. In the main review menu E PLAY
(see pp. 113/122) select the menu item
U SLIDE SHOW (3.28).
2. Open the sub-menu by pressing right on the direc-
tion pad (1.30).
• The 2 function alternatives appear in the view-
finder/monitor (1.19/32),
– ALL
– DPOF
The subsequent actions depend on whether you want
to present all pictures or only those with the appro-
priate markings.
Presenting all pictures on the memory card - ALL
3. Open the relevant viewfinder/monitor screen and
follow the further menu instructions.
• The following appears in the viewfinder/monitor:
– START
– DURATION to select the display time
– AUDIO
1 /
2
(to present all pictures), and
(to present only the pictures
marked accordingly).
to start the presentation
for simultaneous playback of a
sound recording (where available)