Program: For Preprogramming Tracks In Any Order; Setting The Alarm Time And Alarm Type; Setting The Alarm Time - Silvercrest KH 2254 Operating Instructions Manual

PROGRAM: For preprogramming
tracks in any order
1.
Insert the CD.
2. ON/OFF
Press the button
tracks appears briefly in the display
3.
After pressing the button
shows . The programme indicator
p01
4. SKIP/SEARCH MIN
Using the buttons
SEARCH HR
w select the desired titles. Then
PROGRAM
press the button
Proceed as described above to program further
tracks. A total of 20 tracks can be programmed.
5. PLAY/PAUSE
Press the button
PROGRAM
The LED indicator
6. STOP
Press the button
If you wish to repeat the programming later:
1. PROGRAM
Press the button
the programming. The LED indicator
blinks.
2. PLAY/PAUSE
Press the button
programmed titles. The LED indicator
f glows.
• To erase the programming, open the CD com-
q
partment or switch the appliance off and then
back on.
Setting the Alarm Time and
Alarm Type
With this appliance you can set two different wake-up
times that can be used individually or simultaneously:
• AL 1 or AL 2
• AL 1 and AL 2
u . The total number of
i
.
PROGRAM
;
, the display
f
blinks.
SKIP/
and
;
to save the title.
2#
to start playback.
f
glows.
2@ to stop playback.
; again to activate
PROGRAM
;
to play back the
PROGRAM

Setting the alarm time

Alarm (AL 1):
• Press the button
• Using the buttons
ARCH HR
w
The alarm time is stored as soon as you press the
ALARM 1
y
button
ars in the display.
• If you wish to check the alarm time, press once
more on the button
Alarm (AL 2):
Press the button
steps as described above. The indicator for Alarm 2
appears in the display.
• Now select the alarm mode by using the func-
tion selector switch
f
Alarm mode BUZZER
• Slide the function selector switch
tion BUZZER.
Alarm mode Radio
• Carry out the steps 1 to 7 described under "Radio
operation" to tune in to the radio station of your
choice for the radio alarm.
Alarm mode CD Player
1.
Open the CD compartment
OPEN
the button
labelling uppermost) into the CD compartment.
2.
Slide the function selector switch
tion CD.
Take note:
The total playing time of the CD player in
alarm mode is 60 minutes.
If no CD is inserted and alarm mode CD player
is set, the alarm signal of the setting BUZZER
sounds automatically.
- 7 -
ALARM 1
y .
SKIP/SEARCH MIN
, programme in the desired time.
. The indicator for Alarm 1 appe-
ALARM 1
y
.
ALARM 2
t
and carry out the same
RADIO CD BUZZER
3! ( , or
3!
q
in that you press
e
, then insert a CD ( with the
3!
SKIP/SE-
and
).
to the posi-
into the posi-