Feature Set Up; Set Up Mode - Clarity C600 User Manual

FEATURE SET UP

TELEPHONE HANDSET
Set-up Mode
The C600 handset goes into setup mode automati-
cally when the battery is connected.
Or press and hold MODE button for 3 seconds to
enter setup mode. If there is no input within 30
seconds, the language will be set to the last selected
one and go back to standby mode.
Setting Language
1. After entering setup mode, the LCD display
2. Press the 1 or 2 button once to change the
3. Press UP (
Setting Contrast
There are 3 contrast levels and the default is set to
level 2.
1. After setting the language, press UP (
2. The LCD display will show LCD CONTRAST
3. Press the 1, 2 or 3 key to change the level.
4. Press the UP (
Setting Area Code 1
1. After setting Contrast, press UP (
2. The LCD display will show AREA CODE 1
16
will show SEL LANGUAGE and then 1.ENG
2.SPA alternately with a tick mark against the
selected language.
language.The tick mark will move against the
new selection.
) to go to the next menu.
▲
to begin setting contrast.
and 1 2 3.
The current selected level will be highlighted.
) or DOWN ( ) button to go
▲ ▼
to the next menu.
) button
▲
to set Area Code 1.
and XYZ with X digit blinking.
3. Enter the area code number using the
numeric keys on the handset.
4. Press the UP (
to the next menu.
Setting Area Code 2
1. After setting Area Code 1, press UP (
button to set Area Code 2.
2. The LCD display will show AREA CODE 2
and XYZ with X digit blinking.
3. Enter the area code number using the
numeric keys on the handset.
4. Press the UP (
to the next menu.
Setting Long Distance Service
(LDS) Code
1. After setting Area Code 2, press UP (
button to set LDS Code.
2. The LCD display will show LDS CODE and X
with X digit blinking.
3. Enter the LDS number using the numeric keys
on the handset.
) key 4. Press the UP (
▲
to the next menu.
Setting Easy Mode
1. After setting LDS Code, press UP (
to set the Easy Mode.
2. The LCD display will show EASY MODE and
1.ON 2.OFF.
3. Press 1 or 2 to change the mode.The tick
mark will move against the selected mode.
4. Press the UP (
change the mode.
FEATURE SET UP
) or DOWN ( ) button to go
▲ ▼
)
▲
) or DOWN ( ) button to go
▲ ▼
)
▲
) or DOWN ( ) button to go
▲ ▼
) button
▲
) or DOWN ( ) button to
▲ ▼
17