Nitrogen Gas Filling (Option); Zoom Control Selecting Switch (Only Xj27X Af And Xj27X) - Canon XJ100x9.3B AF Operation Manual

Wiper operation varies according to the mounted
accessories. Refer to the operation manual of the accessory
to use.
* (NOTE)
• Do not operate the wiper with dust, oil, foreign obstacles stained
on the glass surface. Otherwise, the glass may be damaged.
Completely clean the glass before operation.
• If the wiper is operated in the low-temperature environment or for
wiping snow, condensation may form on the glass.
• Do not operate the wiper in a dry condition without moisture.
Otherwise, rubber blade deterioration or incomplete wiping may
result.
• Replace the rubber blade when worn, deformed, or damaged, or
when incomplete wiping occurred. Contact your Canon dealer.
• To use the wiper manually, set the power switch of the wiper to
"OFF".
Do not manually use the wiper while it is turned "ON".
4-5 Nitrogen Gas Filling
(Option)
To prevent fog or condensation on the internal surface of the
lens, you can fill the lens barrel with nitrogen gas.
Nitrogen gas should be refilled at the periodic overhaul, and
before the critical event.
* (NOTE)
To refill nitrogen gas, gas canister and filling tool are required.
Contact your Canon dealer or your Canon sales representative.
4-6 Zoom Control Selecting
Switch
(Only XJ27x AF and XJ27x)
Either the speed servo or position servo can be set as the
servo system from the analog zoom demand. This setting is
performed using the zoom control selecting switch.
Setting steps
1
Remove the lens shroud from the lens body.
2
Set to the servo type using the zoom control selecting
switch.
3
Upon completion of the adjustment, mount the lens
shroud on the lens body.
Zoom Control Selecting Switch
"SPEED" position (left side):
Speed servo (default)
"POS." position (right side):
Position servo
* (NOTE)
• Similar setting options to the zoom control selecting switch are
also equipped on the information display, however only the status
of the servo system is reflected on the display. For that reason,
the setting can not be performed on the information display.
• With "POS." selected, operation can not be performed from the
digital zoom demand.
E19
4 Other Functions and Options