Warning Symbol Used In This Manual - Nikon HVBTR-1200 Instructions For Use Manual

Thank you for purchasing the Nikon products.
This instruction manual is written for the users of the Nikon CNC Video Measuring System
iNEXIV "model VMA-2520".
To ensure correct usage, read this manual carefully before operating the instrument.
•
It is prohibited to reproduce or transmit this manual in part or whole without Nikon's expressed
permission.
•
The contents of this manual are subject to change without notice.
•
Some of the products described in this manual may not be included in the set you have
purchased.
•
Although every effort has been made to ensure the accuracy of this manual, if you note any
points that are unclear or incorrect, contact your nearest Nikon representative.
•
Also refer to the instruction manuals for any other system that you may be using in conjunction
with this product (such as a personal computer, display, etc.).

Warning Symbol Used in This Manual

Although Nikon products are designed to provide you with the utmost safety during use,
incorrect usage or disregard of the instructions can cause personal injury or property damage
as well as voiding the terms of warranty. For your safety, read the instruction manual carefully
and thoroughly before using the instrument. Do not discard this manual but keep it near the
product for easy reference.
In this manual, safety instructions are indicated with the symbols shown below. Be sure to
follow the instructions indicated with these symbols to ensure correct and safe operation.
Symbol
WARNING
CAUTION
Meaning
Disregarding instructions marked with this symbol may lead to death
or serious injury.
Disregarding instructions marked with this symbol may lead to injury
or property damage.
- i -