S Uni-Direct.cmd; S Language; S Recall Factory; S Menu Access - Epson PP 408 User Manual

S Uni-Direct.CMD

If NO is selected, commands for uni-directional printing will be ignored. The
default setting of YES means that commands will be carried out to switch
from bi-directional to uni-directional or vice versa.
S TRACT. FF-MODE (Tractor Form Feed Mode)
EXECUTE FF means, every form feed sent to the printer will be executed.
If you set IGNORE FF, only a form feed before printable characters will be
executed, that means blank pages will be avoided.
Special Sub-Items under INSTALLATION

S Language

The operator panel may display its messages in three languages. Select one
out of the following: ENGLISH, DEUTSCH, FRANCAIS.
S RESTORE SET UP
With this function all settings of the last SAVE procedure will be restored.

S RECALL FACTORY

All standard settings of the firmware will be restored. The contents of Page
Counter and the Paper-in Adjust will not be changed. Use the function SAVE
if the standard settings shall be active after power off/on.
Configuring the printer Configuring the printer

S Menu Access

There are four possibilities to define the access to the menu by the user.
S ALL FUNCTIONS All functions can be used (default)
S QUICK SET. OFF
S MACROS ONLY
S NO ACCESS
The menu function PRINT OUT can be activated regardless of the defined
menu access.
Note:
3-21 3-22
With this function the Quick Settings for Macro
Selection, Vertical Position Adjustment, and Fanfold
Displacement can be deactivated in the READY or
BUSY mode. After pressing one of these keys the
display shows shortly LOCKED (see also Chapter 2).
- Macros can be selected using the Quick Macro
Selection keys
- The Vertical Positioning Adjustment Mode can be
entered
- The Fanfold Displacement Mode can be entered.
The menu is not accessible at all.
Only the system manager is able to reset the functions MACROS ONLY
and NO ACCESS (look at the red page at the end of this book).
a a abc
, , and .
MENU
a a
a b c