Table of Contents
Advertisement
Gateway 400 User Guide | Configuration
5.8.2
Access Protection
Change login data for "admin"
The device is supplied with one factory set administrator account.
The default access credentials for the administrator are as follows:
Access name: admin
Password: admin
To change this, enter the new login data and click Save.
Login Parameters
The Idle Timeout is factory set at 10 minutes. In other words, the session is automatically logged out
after 10 minutes of inactivity.
Setting the idle timeout to 1 or more minutes causes an automatic logout to occur if no activity
is detected in the user interface during this time period. After the timeout, the access data is re-
quested again.
If you set the idle timeout to 0 minutes, no automatic logout occurs.
Click Save.
5.8.3
System Time
The date and time of the Gateway 400 can be automatically synchronized with a time server or en-
tered manually. The device is factory set for automatic synchronization, which also takes automatic
changes for daylight saving time taken into account.
Activate automatic time synchronization: If you want to set the Date and Time manually, clear the
check mark. You can then edit the values in the other fields.
Update interval: Select the desired value from the drop-down list.
NTP interface: Select the interface over which the connection to the time server can be made from
the drop-down list.
Time Server ConfigurationDefault: de.pool.ntp.org. You can enter two time servers in the list. You
can add an additional time server to the list with New. Existing entries can be edit-
ed with the Pencil icon
User-defined Time Settings: If the check box Activate automatic time synchronization is disabled,
you can enter the date and time manually.
Set Time Zone: The factory setting for the time zone is GMT+1:00. This corresponds to the value for
Germany.
Click Save.
5.8.4
Languages
The available languages are German and English.
5.8.5
Save Configuration
Here you have the option to save the currently made settings, for example, on the connected PC.
You can also load previously saved configurations again into the Gateway 400 and thus overwrite
any incorrect settings that may have been made with a functioning version.
Note
In order to Save and Load the configuration file, a Password must be specified.
42
.
Advertisement
Table of Contents
