Table of Contents
Advertisement
Gateway 400 User Guide | Your Gateway 400
2.2
Indicators and Connectors on the Rear Panel
Internal frame clock
LED indicator for operating mode when
cascading
Internal data clock
Meaning of the LEDs :
Name
Color
Master
green
Slave
yellow
2.3
Reset Switch
The reset switch is located to the left of the LED indicators (and labeled RES). Use a ballpoint pen or
something similar to press the reset switch.
Be aware that pressing the reset button for different amounts of time initiates different reset ac-
tions as described below:
0.5 s - 5 s
5 s - 15 s
> 15 s
Note
To avoid damaging the device, press the reset switch lightly, i.e., without applying any
force.
Note
Restarting and Resetting the device will cause all ongoing telephone and Internet con-
nections to be interrupted.
14
Connector for power cable
Power switch
Status
on
on
Restart with existing configuration
see
Restarting the Gateway 400 on page 15
Restore factory defaults
see
Resetting the Gateway 400 to the Factory Default Settings on page 15
Additional reset actions (only if requested by customer support)
Meaning
Gateway 400 is in the master mode.
Gateway 400 is in the slave mode.
Advertisement
Table of Contents
