Table of Contents
Advertisement
802SH
2. COM port settings window
After the connection confirmation window, the above window appears. From the list boxes, select a transfer rate (set to 115200 by default) and the
PC COM port that is connected to the handset (phone).
[User Action]
1) Select the COM port connected to the handset (phone) from the "COM Port" list box.
2) Select a transfer rate for the PC to handset (phone) communication from the "Baudrate" list box (set to 115200 by default).
3) Click "Connect".
* When SHPwdReset is started unintentionally, click "Cancel".
3. Main Window
When the COM port settings window closes, SHPwdReset starts to reset the handset (phone) passwords immediately.
If the connection fails, the error message below appears.
On the above window or when the operation is successfully completed, click "OK" to exit SHPwdReset and return to the SPST function selection
screen.
CONFIDENTIAL
Figure 30
Figure 31
Figure 32
2 – 16
Advertisement
Table of Contents
