Sharp 802SH Service Manual page 19

2. COM port settings window
After the connection confirmation window, the above window appears. From the list boxes, select a transfer rate (set to 115200 by default) and the
PC COM port that is connected to the handset (phone).
[User action]
1) Select the COM port connected to the handset (phone) from the "COM Port" list box.
2) Select a transfer rate for the PC to handset (phone) communication from the "Baudrate" list box (set to 115200 by default).
3) Click "Connect".
* When SHDiag is started unintentionally, click "Cancel".
3. Main window
After the COM port settings window, the main window above appears. The handset (phone) initial settings are performed, adjustment values are
obtained, and then adjustments are performed.
CONFIDENTIAL
Figure 19
Figure 20
2 – 11
802SH