Memory Module - HP 15 TouchSmart Notebook PC Maintenance And Service Manual

Memory module

Description
8-GB (PC3L, 12800, 1600-MHz)
4-GB (PC3L, 12800, 1600-MHz)
2-GB (PC3L, 12800, 1600-MHz)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Keyboard (see
●
Top cover (see
●
WLAN module (see
●
System board (see
To remove a memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
Battery on page 35), and then remove the following components:
Keyboard on page 39)
Top cover on page 47)
WLAN module on page
System board on page
55)
60)
Component replacement procedures
Spare part number
693374-005
691740-005
691739-005
69