Information Codes - Samsung DV45H6300 Series User Manual

Gas and electric dryer
Hide thumbs Also See for DV45H6300 Series:
Table of Contents

Advertisement

Available languages

Available languages

PROBLEM
Lint on clothes
Garments still wrinkled
after Wrinkle-Care
Odors remain in
clothing after Refresh.
Water drips from
nozzle when Steam-
Care starts
Sprayed water is not
visible during Steam-
Care

Information codes

Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY MEANING
The thermistor resistance is very low
tE
or high.
Invalid heating Temp when the dryer
HE
is running.
Running the dryer with door open.
dE
Invalid state of key.
bE2
Invalid power source frequency.
FE
Electronic Control Problem
9E1
(Over Voltage Error.)
Electronic Control Problem
AE
(Communication Error.)
Invalid state of Eeprom
EEE
communication.
dF
Invalid door.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
DV6000HA_DC68-03380A.indd 35
SOLUTION
Make sure the lint filter is cleaned before every load. With some loads that
produce high amounts of lint, it may be necessary to clean the filter during the
cycle.
Some fabrics are lint producers (for example, a fuzzy white cotton towel)
and they should be dried separately from clothes that are lint trappers (for
example, a pair of lack linen pants.)
Divide larger loads into smaller loads for drying.
Check pockets thoroughly before washing and drying clothes.
Small loads of 1 to 4 items work best.
Load fewer garments. Load similar-type garments.
Fabrics containing strong odors should be washed in a normal cycle.
This is steam condensation. The dripping water will stop after a short time.
Sprayed water is difficult to see when the door is closed.
English - 35
SOLUTION
Clean the screen or vent.
If the problem continues, call for service.
Call for service.
Clean the door and then restart.
If the problem continues, call for service.
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continue, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Call for service.
Call for service.
Call for service.
Call for service.
2013-12-19
1:07:52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv42h5600 seriesDv42h5400Dv42h5000Dv42h5200

Table of Contents