Installation Guide - Antelope 2 PURE Owner's Manual

4. Installation Guide

It only takes a few moments to harness the benefits of the Pure2 sound.
Follow these simple steps to connect the Pure2 to your system setup:
1. Connect to the AC power source via AC Mains Outlet.
Check and adjust the voltage selector!
2. Connect your choice of Analog/Digital Inputs and Outputs on the rear panel of the device
and make sure the headphone jack is inserted securely in the front panel input.
3. Turn on the device by pressing the power button on the front panel or in the software
control panel once you have opened it.
4. Connect your USB cable to the Pure2 and your computer. The guest operating system
will recognize the new output audio device (Pure2). You should redirect sound from the
computer to your newly indicated output – Pure2.
Mac OS:
In your Apple Menu, go to System Preferences and choose Sound, Select the Output
tab and select Pure2 from the list.
Windows:
Click on your PC's START menu, then select:
SETTINGS / CONTROL PANEL / SOUNDS & AUDIO DEVICES / AUDIO and ensure
that the Pure2 is selected as default audio device.
5. Install the software control panel and audio driver from the Antelope Audio website.
8