Kodak i1200 User Manual page 102

98
3. Replace each tire by sliding the tire off the core.
4. Install each new tire by gently pulling it over the core.
IMPORTANT:Do not overstretch the tire; it may tear.
5. Replace the core assembly in the feed module. You may need to
slide the shaft so the core fits properly within the feed module
housing.
Slide shaft
6. Repeat the replacement procedure outlined above for the other core
assembly.
7. Reinstall the feed module.
8. Reinstall the feed module cover by aligning the tabs in the slots and
pushing the feed module cover down until it snaps into place.
Core assembly
A-61560 June 2006