IMPORTANT: Scan this QR Code with your smart phone to link to the ADMA Drive-
line Safety Manual for more information on the safe use of a driveline during normal
operation and maintenance. Or type in your internet browser the following web
address: www.algqr.com/dme
WING DRIVELINE
Figure MntP-R-0011) Remove the two shield
bearings per half shaft by prying the head of the
bearings up with a screwdriver, and pulling them out
with pliers.
Figure MntP-R-0012) Grasp the Yoke and shield
tube and pull shaft from the shield.
Figure MntP-R-0013) Grease the shield bearing
grooves on the yokes and the inner telescoping
member before assembly.
FN180/FN120 07/12
© 2012 Alamo Group Inc.
MAINTENANCE
Ops-0009-MISC
Maintenance Section 5-8