Table of Contents
Advertisement
Clearing documents
7-4
Follow the steps below to clear the document path:
1. Check each transport area in turn (Areas A through D) for
documents lodged in the document path. You only have to remove
the jammed document(s). The Jog feature places the rest of the
documents in the exit hopper. Make certain all operator-accessible
areas are firmly closed and the transport plates are locked into
place.
2. Press and hold down the Jog key to clear any remaining
documents.
3. Collect the documents located in the transport system. Put them
back into their original order, if necessary.
4. Reset the image address, level, etc., if necessary.
5. Rescan the documents. If an error code appears in the status
display, check each transport area again to make certain all
documents have been cleared.
NOTE: Green labels on handles designate operator-accessible areas.
A-61140 January 2000
Advertisement
Table of Contents
