Saving Printer Configuration - Digital Equipment LG06 Operator's Manual

Saving Printer Configuration

Changes to the font or line spacing will be lost when the printer is turned off, unless you save the
changes. When you save a set of configuration values, they become the power–up default configuration.
To save configuration values:
1. Press the ON LINE switch to take the printer off–line. "Off–Line/Emulation" appears on the message
display.
2. Open the printer cover.
3. Press UP and DOWN simultaneously to unlock the ENTER switch. "Unlocked" appears briefly on
the message display.
4. Press NEXT (or PREV) until "Off–Line/Save Config" appears on the display.
5. Press ENTER. The printer saves the parameters in nonvolatile memory then displays "Done."
1st Edition, April 1993
19