Dell OptiPlex 9020M Owner's Manual page 47

Option
Server IP Address
Server Port
Client Address Method
Client IP Address
Client SubnetMask
Client Gateway
DNS IP Address
Domain Name
Advanced
Description
Specifies the primary static IP address of the Cloud Desktop server with
which the client software communicates. The default IP address is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop .
Specifies the primary IP port of the Cloud Desktop, which is used by the
client to communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Specifies how the client obtains the IP address.
• Static IP
• DHCP - This option is enabled by default.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Specifies the static IP address of the client. The default IP address is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Specifies the subnet mask of the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop .
Specifies the gateway IP address of the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop .
Specifies the DNS IP Address of the client. The default setting is
255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop.
Specifies the Domain Name of the client.
NOTE: This field is only relevant when the Integrated NIC control in
the System Configuration group is set to Enable with Cloud Desktop,
and when the Client Address Method is set to Static IP.
Specifies for Advanced debugging
• Verbose Mode - This option is not set by default.
NOTE: This Option is only relevant when the integrated NIC control in
the System Configuration group is set to enable with Cloud Desktop.
47