Long Operation - Mitsubishi Electric Mr.SLIM MSH24WN Operating Instructions Manual

LONG OPERATION

Use this operation when you want the air flow to
reach a long distance.
CLOCK
TOO
ON/OFF
WARM
FAN
I FEEL COOL
VANE
HEAT DRY
MODE WIDE VANE
LONG
RESET CLOCK
10
Perform the following operations while the
unit is operating.
■
Mechanism of the LONG operation
˚F
˚C
In the following example, the VERTICAL VANE is set to
AMPM
(front).
AMPM
TOO
COOL
STOP
Fan speed: Higher
Solid arrow: When the LONG mode is used
START
Dotted arrow: When the LONG mode is not used
To release the LONG mode:
HR.
MIN. ■
■ LONG mode is also released by pressing the
■ Even when the LONG mode is being used, the air may not
reach a long distance due to the installation location of the
air conditioner.
In this case, press the
(High), and then press the
■
MODE
,
OFF timer (explained on the right) are available.
LONG
Press the button.
The fan speed increases.
When the fan speed is set to
is higher than a fan speed determined by the room
temperature and the set temperature.
In addition, the HORIZONTAL VANE moves to the po-
sition for LONG mode.
COOL/DRY
LONG
Press the button again.
FAN
button to set the fan speed to
LONG
button.
FAN WIDE VANE
, and buttons, temperature buttons and the ON/
(AUTO), the fan speed
HEAT
VANE
button.