Table of Contents
Advertisement
Long operation
HOW TO USE LONG OPERATION
Perform the following operations while the unit is operating.
LONG
Press
button.
■
The fan speed increase.
When the fan speed is set to AUTO, the fan
speed is higher than a fan speed determined
by the room temperature and the set tempera-
ture.
In addition, the HORIZONTAL VANE moves to
the position for LONG mode.
Mechanism of the LONG operation
In the following example, the VERTICAL VANE
is sent to
(front).
COOLING/DRY
Fan speed: Higher
Solid arrow: When the LONG mode is used
Dotted arrow: When the LONG mode is not used
To Release the LONG mode.
LONG
Press the
button again.
■
Econo cool operation
Enable this mode to enjoy healthy, comfortable and power-saving cooling operation.
Please operate as follows in manual cooling mode
■ Press
button.
Select the air conditioner operating in
and automatically according to the outlet temperature.
Moreover, the set temperature increases by 2℃ automatically based on cooling operation.
When quitting Econo Cool operation
■ Press
button again.
·In Econo Cool operation, press
·Airflow speed button
continuously.
What is Econo Cool?
Swinging airflow (variable flow) feels cooler t�an constant airflow, t�erefore, even if t�e set temperature is set to a
higher one by 2℃ you can feel comfortable and power is saved.
HEATING
(Econo Cool) control mode, which controls the horizontal vane to swing periodically
button or change operation mode to quit Econo Cool button.
, Extreme Hot
or Extreme Cold
Note
LONG mode is also released in the following ways.
■
• By pressing the
• By pressing the
Even when the LONG mode is being used, the air may
■
not reach a long distance due to the installation location
of the air conditioner.
In this case, press the
to
(Hi), and then press the
,
and
■
the ON/OFF timer are available.
button and Timing ON/OFF button can be used
12
button
button (only during COOL mode)
button to set the fan speed
LONG
button.
buttons, temperature buttons and
Advertisement
Table of Contents
