Installing The Custom Camera Insert - Kodak EasyShare Series 3 User Manual

Getting started

Installing the custom camera insert

IMPORTANT: Use the custom insert that came with your digital camera to dock the
camera, otherwise the camera may not fit on the printer dock.
Purchase a custom camera insert for your Kodak EasyShare digital camera and other
accessories at www.kodak.com/go/accessories.
2
■ Locate and install the custom insert included with
your camera.
IMPORTANT: Depending on your camera connector, you
may also need to use the Kodak dock
adapter D-26. See the instructions included
with the dock adapter.
a Remove any packing material covering the
connector.
b Place the rear tabs of the insert in the slots
toward the back of the printer dock.
c Press the front of the insert down and snap into
place.
www.kodak.com/go/support