Transferring Pictures From A Kodak Card Reader - Kodak EasyShare Series 3 User Manual

Transferring pictures from a Kodak card reader

The Kodak EasyShare printer dock series 3 is compatible with the Kodak 8-in-1 card
reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card
readers may work with the printer dock; however, other manufacturers' card readers
are not supported.
1 Make sure Kodak EasyShare software is installed (see
dock is connected to your computer (see
4 Insert the memory card into the card reader (see your card reader user's guide for
details). Do not insert more than one card at a time.
5 Press the Transfer button,
Kodak EasyShare software opens on your computer (if it is installed).
6 Use Kodak EasyShare software to transfer pictures from the card reader to your
computer. See the Kodak EasyShare software Help for details.
The printer dock Transfer light blinks while the pictures are being transferred. The
Transfer light continues to blink until the Transfer or Print button is pressed, or until the
connection is no longer available.
NOTE: With the software installed, pressing the Transfer button establishes one or more new drive
connections for the card reader. You can view, copy, delete, and otherwise manage files on the new
drives, as you do with other drives on your computer. See your computer documentation for details.
Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or
visit www.kodak.com/go/accessories.
www.kodak.com/go/support
Using the printer dock with a computer
page
2 If a camera is docked, remove it.
3 Plug the USB connector from the card reader into
the USB connector located on the side of the printer
dock.
NOTE: If the card reader is already plugged in but the connection is
no longer available, disconnect then reconnect the USB cable
to re-establish the connection.
, on the printer dock.
page 20) and the printer
23).
25