Setting The Picture Quality; Tagging Pictures For Printing - Kodak EasyShare Series 3 User Manual

Setting up your digital camera

Setting the picture quality

Tagging pictures for printing

NOTE: The following procedure pertains to Kodak EasyShare digital cameras. For information on tagging
pictures on other brands of ImageLink system compatible cameras, see the camera user's guide.
1 Press the Share button.
2 Press to locate a picture.
3 Make sure Print
location, highlight Print All
4 Press to select the number of copies (0 - 99). The default is one. Zero
removes the tag for a selected picture.
The Print icon
■ To apply a print quantity to other pictures, press
the print quantity as is, or press
5 Press the OK button.
6 Press the Share button to exit.
NOTE: To remove print tagging from all pictures: from the Share menu, highlight Cancel Prints
press the OK button.
To print tagged pictures from your digital camera, see
pictures from your computer, see
12
Before taking pictures, change the picture quality
setting (or resolution) on your digital camera to
3:2
take are proportional to the printer dock paper,
preventing unwanted cropping of your pictures.
See your camera user's guide for more information.
is highlighted (to tag all pictures in the current image storage
), then press the OK button.
is displayed in the status area.
page
. This ensures that the pictures you
to change it.
page
26.
www.kodak.com/go/support
to locate them. Keep
15. To print tagged
, then