Dss Or Satellite Receiver - Ada Cinema Rhapsody Operation & Installation Manual

DSS or Satellite Receiver

The Cinema Rhapsody is preprogrammed to permit you to easily
connect a DSS or Satellite Receiver.
Standard RCA interconnects are used for the audio connection while
a 75Ω coax cable is used for the video connection.
Connection 1 - DSS Audio Output - You will need to connect the
DSS's audio output (stereo RCA type) to the Cinema Rhapsody's
Audio Input #5.
Connection 2 - DSS Receiver's Video Output - You will need to con-
nect the DSS's video output (Composite Video) to the Cinema
Rhapsody's #5 Video Input.
Connection 3 (Optional) - DSS's S-Video Output - You may also
choose to connect the S-Video (Super Video) output of the DSS to
the Cinema Rhapsody's #2 S-Video Input. This will require a spe-
cial super video cable. Please note, if your projector or TV does not
have a super video input, you will not need to make this connection
as the Cinema Rhapsody does not cross convert S-Video to Com-
posite Video.
Connection 1
Stereo
Audio Out
R
Video
Cable
5
VIDEO INPUTS
1 3 5
2 4 6
1 2 3
L
5R
R
Stereo AudioCable
(This cable carries standard 2 channel audio)
Connection 2
DSS/SATELLITE
Video S-Video
Out Output
L
2
VIDEO OUT
7 1 REC
S-VIDEO OUT S-VIDEO INPUTS
MAIN REC 1 2
8 2 OSD
AUDIO INPUTS AUDIO OUTPUTS
4 5 6 7 8 REC
5L
L
L L
R R R
OUT
Connection 3
Optional S-Video Cable
(Only functional if you connect your TV or Projector
to the Cinema Rhapsody's "Main" S-Video Output.)
3 4
Cinema Rhapsody
DIGITAL AUDIO INPUTS
L LS SUB 1 3
OPTICAL INPUTS
1 2 3
R RS C 4
2
For DSS or SAT Receivers that
sport a Digital output, you
may select to alter the Cinema
Rhapsody's "Out Of The Box"
setup to switch the audio for
the DSS/SAT Receiver to a
digital input that is not used.
1 Turn the Input knob to
DSS/SAT 6 and press the
knob.
2 Turn the Mode knob
clockwise to SETUP MODE
and press the knob.
3 Turn the Mode knob to
AUDIO INPUT and press the
knob. Once the knob is
pressed the display will read
"ANALOG IN 5".
4 Turn the mode knob
until the display reads the cor-
responding digital input that
you have connected your DSS
to and press the knob.
"Dolby", "AC-3", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
©1992-1997 Dolby Laboratories, Inc. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No.
5,451,942 and other worldwide patents issues and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater
Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved. Manufactured under license from Lucasfilm Ltd. US Pat. Nos.
5,043,970; 5,189,703; and 5,222,059. Foreign patents pending. "Lucasfilm" and "THX" are registered trademarks of Lucasfilm Ltd.
WARNING! Risk Of Hazardous Energy!
CAUTION
Make Proper Connections.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVERTISSEMENT! Energie Electrique Dangereuse!
Faire Des Connexions Propres Pour L'Hautparleur.
ATTENTION!
Voir La Notice De Fonctionnement.
RISQUE DE CHOC ELECTRIQUE.
NE PAS OUVRIR
CAUTION: Disconnect Supply Cord Before Servicing.
MADE IN U.S.A.
ATTENTION: Debrancher Avant Le Depannage.
LOW VOLTAGE
Selector &
Safety Fuse
DATA PORT 12VDC OUT On This Side
Serial Data 100mA Max Per
ADA Bus™ DC 1 DC 2
1 2 3 4 1- 2+ 1- 2+ 115V
Use Same
AC OUTPUT
AC INPUT Value Fuse
115V~1AS.B.
10A~ Max Switched 115V~60Hz/230V~50Hz
230V~.5AS.B.
Page 25
Voltage
115 V
230V